Hello Fellow Bikers,

Sharing what our great customers have to say about the Easy Wheeler is the best part of our job here at Midwest Innovative Products. We are a small American company, but we take great pride in knowing that we are producing the very best American-Made motorcycle products possible and are fully committed to match that quality with the highest level of service to our customers. 

If you take pride in keeping your bike clean and looking it’s best, and if you are looking for an easier and more convenient way to keep your tires, rims, and spokes looking like new, then read what Easy Wheeler owners have to say!  If you are a new Easy Wheeler owner, please let everyone know what you think too! Please add your comments on the link below. We would really like to hear from you!

 Best Regards and Ride Safe!

Jim Meyer & Jon Meyer / Owners
 Midwest Innovative Products Inc
      Waterloo, IL  USA

If your PC or laptop uses an email application such as Microsoft Outlook or other, simply click on the link above. If you use web mail, copy the link and paste into the ‘Send To:’ of your message screen.

From: ‘Hodge, Mark’
Sent: Tuesday, May 20, 2008 1:07 PM
To: customerservice.easywheeler.com
Subject: Easy Wheeler - Another Proud owner

Jim, Got the EW today and just wanted to say thanks. As I have previously stated, I am a big fan of the EW and plan to show it off anytime I can. I am truly a walking ad for this thing.

When I got my Easy Wheeler I was very impressed with the build and quality of the device. I have not seen anything like the quality of materials and craftsmanship that is evident in this tool. I have found may uses for the Easy Wheeler and recently found one more. I own a Star Stratoliner and due to its size, and the attached saddle bags, the rear wheel is almost completely covered. This makes it difficult to not only clean the rear wheel, but it also makes it difficult to check tire pressure or even inspect the rear tire before the next ride.

Unfortunately for the first time in many years of riding I was presented with a hair raising experience that was new to me; a flat rear tire at high speed! This brought to my attention one more excellent reason to own this wonderful tool. Due to the fact that most of my rear wheel is covered, it’s very difficult to inspect the rear tire for wear or damage. This small but important step required moving the bike about a foot or so at a time and then getting all the way on the ground again to inspect the tire. Now, I just roll it up on the Easy Wheeler, and ratchet the wheel as needed and can quickly and effortlessly inspect the tire for damage. The time savings on this step alone was worth the price to me.

I cannot recommend this device enough. It’s truly a work of art in craftsmanship and makes many little tasks quick and easy to accomplish. I highly recommend this to anyone who owns a motorcycle or any kind. Thanks Easy Wheeler!


C. Mark Hodge
Fenton, MO

From: ‘Rob Markson’
Sent: Wednesday, April 2, 2008 09:17 AM
To: jim@easywheeler.com
Subject: RE: Easy Wheeler II

Jim

this is one solid piece of equipment.
I actually used it the other day for a use it probably isn't intended for
one of my bikes was making a squeaking noise while I was riding it and I could
not duplicate by pushing it around the shop or jumping up and down on it
I rolled the bike up onto the trailer with the easy wheeler strapped the bike down
to simulate my apex weight and used a air ratchet on the roller to turn the
back wheel and found a pulley wasn't aligned correctly after I lowered the bike.

little cutting on the pulley and noise went away

Thank You

Rob Markson 
Phoenix Az 85019

(NOTE FROM EASY WHEELER - Thanks Rob! We of course do not recommend this to our customers, but it does illustrate the resourcefulness of some motorcycle enthusiasts as well as the heavy duty construction of the Easy Wheeler.! )

From: ‘Russ’
Sent: Wednesday, April 2, 2007 09:17 AM
To: information@easywheeler.com
Subject: Gold Wing Rider

To Midwest Innovative Products,
First off I would like to thank you for inventing something that has been needed for a long time. I ordered my Easy Wheeler and received it about a month ago, but just got the chance to get the bike out and use it. I can't believe that cleaning my wheels would be so easy. I have a 1996 Honda Goldwing SE and have always had trouble cleaning my rear wheel. I can only get to about an eighth of the wheel, and was always getting up to move the bike so as to reach more of the hidden wheel. Well no more! Now I can sit in one place and clean the entire wheel without moving. Also I can inspect the wheel at the same time, not to mention cleaning the front wheel is really easy too. You all at Midwest Innovative Products have made my job easier. Your product is well made and well thought out too. I can never see me wearing out the Easy Wheeler, it's built like a rock. The craftsmanship is superb. Again thanks for making my wheels shine with a lot less work.
 

Thanks Again
Russ Griffith
Columbia, Illinois 
U.S.A.
 

From: ‘WILLIAM’
Sent: Wednesday, March 2, 2007 09:17 AM
To: information@easywheeler.com
Subject: RE: Received Easy Wheeler

Thanks for your follow up. The Easy Wheeler arrived as promised and the product has turned out to be even better than your promise. I needed to do some cleaning of my chrome wheels after I washed the 2007 Harley Low Rider. It cut the cleaning time more than half the previous times and I used the electric drill ratchet attached to the shaft on the Easy Wheeler for rotation and that worked great. The craftsmanship of the Easy Wheeler is flawless and well designed. I had no problem pushing the bike onto the ramp and onto the stand. Using an extra block under the kick stand was a good tip and made the whole set up seem more stable as the bike wheel was rotated. The one thing I found a plus is that the Easy Wheel is easily used by myself. (Didn’t have to have my wife assist!!) I look to many years of satisfied use of the Easy Wheeler. I highly recommend it to anyone that wants to keep their motorcycle chrome wheels clean or need to work on the wheel. I hope to use again this weekend temperature allowing and as promised will send pictures. Jim again thanks for a great product.

Will – Charlottesville, VA - Easy Wheeler Owner

From: ‘Dennis Martin’
Sent: Wednesday, November 14, 2007 06:03 PM
To: jim@easywheeler.com
Subject: Review draft

THUNDER ROADS MAGAZINE
MISSOURI / SOUTHERN ILLINOIS MAGAZINE
Thunder Roads Product Testing  

Every now and then we here at Thunder Roads Magazine will come across a product that is really something that should be talked about. It is the Easy Wheeler. You may have seen similar products, but this is truly different. We all know what a hassle it is to clean the tires and wheels when there is a fender in the way. After washing everything that is possible, you then have to move your motorcycle a couple feet to get the rest. With the Easy Wheeler you are able to rotate the tire and wheel and clean everything in one sitting. The creators say that some motorcycle models may need a block of wood under the side stand because the bike may lean is too much. I tested it using a Road King and I did not have to use anything.  This is how it works. Roll the motorcycle up the gentle ramp and unto the rollers. This took less effort than I anticipated. The tire will be approximately 1” off of the concrete. Clean what you possibly can and then using a ½ socket and a ratchet, or drill with a socket attachment, spin the roller that is equipped with a hex shaft. The contoured rollers keep the tire from traveling to one end. Clean the rest of the wheel and tire and you’re done. Pull the motorcycle off the Easy Wheeler and repeat for the other wheel and tire. After that this product can be stored in an up-right position, against the wall out of the way, until the next cleaning. If you are like me, it won’t be long!  The Easy Wheeler chassis and rollers are constructed of aircraft grade 6061 T6 aluminum, held together with stainless steel screws. The rollers have chrome steel, double sealed bearings to ensure there will be no maintenance problems. The craftsmanship of this product would cause a NASA engineer to become speechless. It is a well engineered tool that has been long overdue, until now. The contoured rollers are what put this product above the rest. The Easy Wheeler was designed by bikers for bikers, right here in the USA.  Another application for this product is for motorcycle chain maintenance. Instead of having to use a motorcycle jack to get the rear tire off the ground, use the Easy Wheeler and there is less hassle.

Dennis MartinOwner / Editor
Thunder Roads Magazine MO / So. IL
www.thunderroadsmo.com